Skip to content

Bathroom renovation

Waterproofing, tiling, plumbing — priced line by line.

Bathroom renovation in Tbilisi as of 18 October 2026: a 6 m² bathroom in standard grade costs about 10,733 ₾ (1,789 ₾ per m² of floor), from economy to premium 8,146–17,562 ₾; it takes 1 month.

·

roughly

1358–2927 ₾/m²

typical size 6 m² — 8,146 ₾–17,562 ₾

Priced from a maintained list of real Tbilisi rates. The final price is confirmed by a contractor on site.

Get a price

Free for homeowners

What a bathroom renovation includes

Stripping the old tiles and fixtures, new water and drainage runs, waterproofing, screed, wall plaster, floor and wall tiles, filling and painting the ceiling, a door, sockets and a light, fitting the fixtures. That is the set the calculator uses for a "bathroom".

The price follows the room's geometry: floor, walls up to the ceiling, the number of outlets. That is why a bathroom costs more per metre than a flat on average — the most expensive work is concentrated in a small area.

Waterproofing — the line not to skip

Waterproofing sits under the tiles and cannot be seen once handed over. If it was skipped or done badly, the flat below finds out. On SIVRCE stages are accepted in order: the tiling stage cannot be accepted until the waterproofing stage has been — with photos, while it is still visible.

Line-by-line estimate: 6 m², standard

LineQuantityLabourMaterialTotal
Demolition6 m²144 ₾30 ₾174 ₾
Door installation1 pcs330 ₾150 ₾480 ₾
Waterproofing6 m²216 ₾174 ₾390 ₾
Floor screed6 m²144 ₾114 ₾258 ₾
Electrical wiring4 pcs116 ₾220 ₾336 ₾
Sockets and fixtures4 pcs48 ₾20 ₾68 ₾
Plumbing rough-in6 m²468 ₾306 ₾774 ₾
Bathroom tiling33 m²1,815 ₾3,300 ₾5,115 ₾
Ceiling skim coat6 m²162 ₾84 ₾246 ₾
Sanitaryware installation3 pcs930 ₾210 ₾1,140 ₾
Ceiling painting6 m²90 ₾120 ₾210 ₾
Wall plastering27 m²351 ₾216 ₾567 ₾
Labour and materials4,814 ₾4,944 ₾9,758 ₾
Contingency (4%)390 ₾
Delivery (4%)390 ₾
Waste removal (2%)195 ₾
Total10,733 ₾

Stages and duration

The plan will contain these stages, in this order. Duration — 1 month (28–33 days), including screed and plaster drying time.

  1. Demolition
  2. Rough electrical
  3. Rough plumbing
  4. Plastering
  5. Floor screed
  6. Waterproofing
  7. Tiling
  8. Ceilings
  9. Doors
  10. Final fit-out & cleanup
Your exact estimate in 2 minutes

Free, no account, no phone number. Nothing reaches a contractor until you decide.

How it is calculated

How a renovation runs on SIVRCE

  1. 1

    Estimate

    You pick the property type, area, condition and grade — the price appears at once, broken down by work. No account, no phone number, and nothing is sent to anyone.

  2. 2

    Request or invitation

    When you decide, you send a request or invite a specific contractor from their profile. Your phone number and address are seen only by the contractor you chose or who accepted your invitation.

  3. 3

    Site visit and measuring

    The contractor proposes a time and you confirm it. On site they measure and check what a floor plan does not show: walls, floor, wiring.

  4. 4

    Offer and contract

    After the visit the contractor sends an offer: amount, lines, dates, warranty. Accepting it is the contract. There is no contract before the visit — the system does not allow it.

  5. 5

    Stages you accept

    The work is split into stages. The contractor hands each stage over with photos and you accept it — in order: a stage cannot be accepted before the one it depends on.

  6. 6

    Price changes only with your consent

    After the contract the price changes only through an estimate change: the contractor states the reason, the amount and the days, and the change takes effect only once you approve it.

  7. 7

    Handover and warranty

    At the end you sign the acceptance act and the warranty begins. You pay the contractor directly; receipts are uploaded and confirmed by the other side — SIVRCE neither holds nor moves your money.

Common questions

How much does a 6 m² bathroom renovation cost?
As of 18 October 2026, about 10,733 ₾ in standard grade, 8,146 ₾ in economy and 17,562 ₾ in premium — labour, materials and overheads included.
How long does a bathroom renovation take?
For a 6 m² bathroom — 1 month, including screed and waterproofing drying time.
Can I renovate just the bathroom?
Yes. The calculator treats the bathroom as a room of its own: its floor, walls and outlets, without the flat's consumer unit and doors.
Why does a bathroom cost more per metre?
Waterproofing and plumbing runs concentrate in a small area, so the rate per square metre sits above the flat's average.
Are the fixtures included?
The labour and materials are. The fixtures themselves — the WC, the taps — you choose, and they are not in the per-metre price.
Is this the final price?
No. It is a calculation from the price list, accurate to ±15%. The final price is named by the contractor after the site visit, and it is fixed in the contract.
Can the price rise after the contract?
Only through an estimate change that you approve: the contractor states the reason, the amount and any extra days. Without your approval the price does not change.
What does SIVRCE cost the homeowner?
Nothing. The estimate, the request and tracking the renovation are free for the homeowner. The platform fee is paid by the contractor, and it becomes due only after you have accepted the work.
Are fixtures, furniture and appliances included?
No. The price covers labour and material on every line — installing the plumbing fixtures, for example. The fixtures themselves, furniture and appliances are your choice and are not in the per-metre price.